JKSSB
JE CIVIL PREVIOUS PAPERS
JAL
SHAKTI
05
DEC 2022 (SHIFT-I)
(RAILWAY
ENGINEERING)
Q.NO.1.
A
good sleeper should be such that:Q.NO.2. The rail section used now-a days in Indian railways is:
Q.NO.3. The boxing of ballast is done to prevent:
Q.NO.4. When the main line on a curve and has a turn out of contrary fixture leading to a branch line, then the branch line curve has a:
Q.NO.5. Determine the radius if curve if it is designated as 3o curve on a 30m arc
Q.NO.6. An advance starter signal is used for which of the following?
Q.NO.7. The split switch type of turn out……………….
Q.NO.8. The spike commonly used to fix rails on wooden sleepers is:
Q.NO.9. The stations having two lines is called a:
Q.NO.10. A welded rail joint is generally
JKSSB
JE CIVIL PREVIOUS PAPERSJAL
SHAKTI05
DEC 2022 (SHIFT-II)(RAILWAY
ENGINEERING)
Q.NO.11.
The
width of top portion of a flat-footed rail isQ.NO.12. The keep the railway ward dry, the ballast used is:
Q.NO.13. Stock rails are fitted
Q.NO.14. The height of the platform above the rail surface for broad gauge tracks should be:
Q.NO.15. The number of sleepers used for rail varies from:
Q.NO.16. The spike used for fixing chairs of bull head rail to wooden sleepers is:
Q.NO.17. To reduce the wearing of rails, the rails are placed at an inward slope of:
Q.NO.18. The distance between the running edge of the stock and switch rails at the switch heel is known as:
Q.NO.19. To prevent the change in gauge and creep, the steel sleepers are fixed by clips, bolts and ……….
Q.NO.20. On Indian railways, cant deficiency allowed on metre gauge is …………broad gauge
JKSSB
JE CIVIL PREVIOUS PAPERSJAL
SHAKTI06
DEC 2022 (SHIFT-I)(RAILWAY
ENGINEERING)
Q.NO.21.
Minimum
packing space provided between two sleepers is:250 mm toQ.NO.22. Steel sleepers consist of steel troughs made out of about 6 mm thick steel sheets, with ………………...
Q.NO.23. The width of platform, under no circumstances, should be less than:
Q.NO.24. For undeveloped areas, the type of gauge adopted is:
Q.NO.25. The maximum limit of super elevation prescribed by Indian railways on metre gauge is……………broad gauge
Q.NO.26. The rails are laid without bending, at flat curves, where the degree of curve is:
JKSSB
JE CIVIL PREVIOUS PAPERSJAL
SHAKTI06
DEC 2022 (SHIFT-II)(RAILWAY
ENGINEERING)
Q.NO.27.
In
India, for broad gauge track, the maximum height of a loaded goods wagon is
fixed as: Q.NO.28. According to railway code formula, the length of transition curve is equal to:
B. 2.4 x
C. 3.4 x
D. 4.4 x
Ans. D
Q.NO.29. The system of signalling used on single line working is known as
Q.NO.30. The joint generally not used in Indian railways is
Q.NO.31. The distance between two adjoining axles fixed in a rigid frame is known as:
Q.NO.32. The best possible wood for sleepers is:
Q.NO.33. A triangle is used for:
Q.NO.34. The main purpose of using bearing plates is to:
Q.NO.35. The sleepers in the form of two bowels placed under each rail and connected together by a tie-bar are known as:
Q.NO.36. Fish bolts are made of: